918368091144 918368091144


Products


Scaffolding Products


  • MS Beam Brackets
    Beam supports made out of 40 N.B. 'M 'Tube comprises of two arms at 500mm c/c welded with forged blades. Beam brackets are used to provide support to beam formwork from slab support standards with provision for accepting U-head jacks. Each beam bracket has a safe load carrying capacity of 1500

    Enquiry Now

    MS Beam Brackets

  • Fixed Base Plates

    Base Plates made out of 150x150x6 mm welded with vertical tube pins or spigots provide plain surfaces to transfer load to ground uniformly.

    Enquiry Now

    Fixed Base Plates

  • APU Scaffoldings
    A P Scaffolding consists of two verticals and one honzontal both of 48.3mm OD tube. On vertocals, Lugs are welded° at 500 mm c/c provide rigid support to horizontal which has built in three way clamps welded at both ends to taking bracing tube connecting Units Standard Sizes : 2000x1220,

    Enquiry Now

    APU Scaffoldings

  • Cantilever Brackets
    We are known as one of the trustworthy manufacturers and suppliers of cantilever brackets from Sonipat (Haryana). Tulika Engineers Pvt. Ltd. specializes in manufacturing cantilever brackets of different sizes, specifications, and designs. These brackets are made using the finest grade metal to

    Enquiry Now

    Cantilever Brackets

  • Cuplock Standards
    Made out of 40 mm N.B. "M" Tubes conforming to I.S.1161 or I.S.-1239 with provision of cups @ 500 rnm interval. Welded bottom are pressed from high quality steel as per I.S.1079 and the captive mobile top cups are made out of malleable casting. Both the cups provide firm grip to Ledger Blades &

    Enquiry Now

    Cuplock Standards

  • Cuplock Ledgers

    Made out of 40 mm N.B."M" Tubes conforming to I.S.1161 or I.S.1239 having identical forged blades welded at both ends.


    Standard Sizes : 1.0M, 1.25M, 1.5M, 2.0M or as per clients requirement.

    Enquiry Now

    Cuplock Ledgers

  • H Frame Scaffolding
    it consists of a rigid welded frame of two vertical 40NB pipes connected by two 32 NB pipes as horizontals. Two pieces of 50 NB pipes are welded at top of the frame to accommodate the bottom of another similar frame. The frames are Interconnected by Scissors cross braces (20 NB "L") through pins

    Enquiry Now

    H Frame Scaffolding

  • MS Spigot

    250-mm long MS spigots made of 3mm thick & 38-mm square pipe is provided at lop of each vertical for making vertical connection Spigots are drilled in two places to receive locking pins.

    Enquiry Now

    MS Spigot

  • MS Cantilever Frame

    Cantilevers made out of 40N.B."M" Tube with forged blaaes welded to two arms and with provision for accepting U-head jacks at the other end.

    Enquiry Now

    MS Cantilever Frame

  • MS Jack with Base Plate

    Made from MS bright bar of 32 or 36 with adjustment upto 225 mm / 350 mm or required size and provided with MS nuts made from 56mm bar. Each jack welded with a base plate of 1S0x150x6-mm size.

    Enquiry Now

    MS Jack with Base Plate

  • MS Jack with U-Head

    Made from MS bright bar of 32 or 36 mm with adjustment upto 225 mm / 350 mm / 450mm or required size and provided with MS nuts made from 56mm bar. Each jack comprises of 6 mm thick & 75 mm wide Stirrup heads (U-Shaped) which is used to hold steel or timber runners.

    Enquiry Now

    MS Jack with U-Head

  • Scaffolding Swivel Coupler

    Pressed coupler made out of 4mm MS sheets are used for connecting two tubes It may be Swivel Coupler for connecting tunes at any other angle.

    Enquiry Now

    Scaffolding Swivel Coupler

  • Right Angle Scaffolding Coupler

    Pressed coupler made out of 4mm MS sheets are used for connecting two tubes It may be Right Angle Coupler for connectrrig tubes at right angle to each other.

    Enquiry Now

    Right Angle Scaffolding Coupler


Formwork Accessories


  • PSC Girder
    Tulika Engineers Pvt. Ltd. is the foremost manufacturer and supplier of the finest PSC girder from Sonipat (Haryana). Our product serves as the hallmark of quality, performance, and longevity, as we manufacture it using the finest material and advanced tools and equipment. We design prestressed

    Enquiry Now

    PSC Girder

  • Pier Cap Formwork Shutter
    Tulika Engineers Pvt. Ltd. is acknowledged as a successful manufacturer and supplier of pier cap formwork shutter from Sonipat (Haryana). For years, we have been fulfilling the needs of buyers in the construction industry with our strong and dimensionally stable pier cap formwork shutter, which we

    Enquiry Now

    Pier Cap Formwork Shutter

  • Purpose Made Formwork
    Tulika also undertakes design. fabricating. manufactunng and supplying of purpose made special formworks like Double adjustor panels. Haunch Plates. Splay Panels, Pipe lacketings. and steel formworks for Railway over bndges. Flyovers, Under ground piping. and other Precast Concrete elements. Tulika

    Enquiry Now

    Purpose Made Formwork

  • Adjustable Beam Clamps

    Adjustable beam clamps are designed for clamping beam formwork and casings so as to hold beam sides firmly thus preventing bulging. It allows inter changeability of arms, which ensures maximum versatility.

    Enquiry Now

    Adjustable Beam Clamps

  • Adjustable Column Clamps

    Adjustable column Clamps are used to hold the column frames position so there is no bulging and de-shaping of columns.

    Enquiry Now

    Adjustable Column Clamps

  • Adjustable Props
    Made out of 40 N B "M" Inner pipe and 50 N.B outer pipe along with 150x150x6 mm base / head plate Each prop consists Of Inner and threaded Outer pipes along with turn handle & nut for final adjustment Props are used for supporting slab forms / under beam bottoms with adjustable

    Enquiry Now

    Adjustable Props

  • Adjustable Span
    It consists of an Inner span sliding Inside the outer span, which is used as a beam supporting, slabform panels. Adjustable Spans facilitates quick & easy erection / striping while eliminating intermediate supports Outer Span is made out of 2rnm MS Sheet, MS Flat 50x6, MS Rod 10mm, 16mm +. MS

    Enquiry Now

    Adjustable Span

  • Circular Column Formwork
    Tulika Engineers Pvt. Ltd. is engaged in the manufacture and supply of circular column formwork, which it makes available as per the clients’ specifications and design approvals. Based in Sonipat (Haryana), we specialize in manufacturing high-quality circular column formwork that is acclaimed

    Enquiry Now

    Circular Column Formwork

  • Metriform Beam
    Metriform Beam are made out of pressed bent M.S sheet (I.S.:1079) 2mm thick stiffened with M.S. angle 22x22x3 & 20 mm round bar. These beams are specially designed for fixed spans to suit spacing between props Beam ends are designed suitably to be attached to the drop plate of the drop head and

    Enquiry Now

    Metriform Beam

  • MS Column Frames

    All types of Column frames (Rectangular, Square, sized, Circular, Angular, T-Shaped, L-Shaped etc) are made out of MS-Sheet 3.15/ 4.0 mm welded and suitably stiffened with MS-Angles as per design.

    Enquiry Now

    MS Column Frames

  • Scaffolding Tie Rod Formwork
    When it comes to scaffolding tie rod formwork manufacturing companies, then the name of Tulika Engineers Pvt. Ltd. is counted among dependable manufacturers & suppliers of the same. We are based in Sonipat (Haryana) and our products find application in nationwide construction projects. We

    Enquiry Now

    Scaffolding Tie Rod Formwork

  • Slabform Panels

    Slabform panels are made out of 2 mm thick press bent M.S. sheet and sheet pressed stiffener welded together. Pressed bent panels are light weight and available with 38 mm depth & 70 mm depth.

    Enquiry Now

    Slabform Panels

  • Pier Formwork
    Tulika Engineers Pvt. Ltd. is a prestigious manufacturer and supplier in the construction industry of India, which brings forth superior grade pier formwork to cater to the needs of the public sector as well as private sector construction companies in India. We are based in Sonipat (Haryana) and

    Enquiry Now

    Pier Formwork

  • Tie Bolts

    Ties of 12, 16 & 20mm dia. and in length to suit wall thickness are threaded at both ends for bolting & anchoring wallforrn plates on ooposne sides.

    Enquiry Now

    Tie Bolts

  • Telescopic Span
    Tulika Engineers Pvt. Ltd. is known as one of the leading manufacturers & suppliers from Sonipat (Haryana) that deal in telescopic span. We use the finest grade metal to manufacture telescopic spans to cater to the roofing needs of the commercial establishments. We manufacture this product in

    Enquiry Now

    Telescopic Span

  • Wallform System
    Wall form panels made out slotted Ms angles / Flats (40x5 or 45x4or 45x5etc.) welded with 2.5mm or 3.15mm sheets & suitably stiffened with ms-angles. It is a self- supporting system for concrete walls Available in pour heights of 1.25m, 2.5m or as per Client's requirement. Conventional wall

    Enquiry Now

    Wallform System


Other Products


  • Mobile Shuttering System
    Caster wheel mounted special wall forms, whch move on channel track so as avoid frequent erection and dismanting of shuttering. Mobile Shuttering comprise of : Caster Wheel mounted heavy-duty soldiers Wall Forms Wailer Pipe Single/Bridge Clips Tie

    Enquiry Now

    Mobile Shuttering System

  • Hydraulic Gantry System
    Hydraulically operated complete shuttenng system lifted by means of heavy duty jacks and pumps which enables continuous concreting of high raised structures like chimneys, silos, overhead water tanks. etc Tulika Engineers Pvt. Ltd is competent and experienced in fabricating and manufactunng all the

    Enquiry Now

    Hydraulic Gantry System

  • Panel Decking System
    We present Panel Decking System which is popularly known as Tulika Decking Systems. Our Panel Decking System is designed to cater various commercial and domestic requirements. Precision of structure and impeccable strength are special attributes of Panel Decking System offered by us. Specially

    Enquiry Now

    Panel Decking System

  • Jumping Formwork System
    Tulika Engineers Pvt. Ltd. is competent and experienced in fabricating and manufacturing all the structural steel components of total slip form system like; yoklegs, wall form plates, lower / upper clamp, wailer clamp, jack holders, bush, level controller, etc. We present Jumping Formwork

    Enquiry Now

    Jumping Formwork System

  • Slipform System
    Hydraulically operated complete shuttenng system lifted by means of heavy duty jacks and pumps which enables continuous concreting of high raised structures like chimneys, silos, overhead water tanks. etc Tulika Engineers Pitt. Ltd is competent and experienced in fabricating and manufactunng all

    Enquiry Now

    Slipform System