Scaffolding Products


Beam supports made out of 40 N.B. 'M 'Tube comprises of two arms at 500mm c/c welded with forged blades. Beam brackets are used to provide support to beam formwork from slab support standards with provision for accepting U-head jacks. Each beam bracket has a safe load carrying capacity of 1500 kg


Yes! I am interested


Base Plates made out of 150x150x6 mm welded with vertical tube pins or spigots provide plain surfaces to transfer load to ground uniformly.


Yes! I am interested


A P Scaffolding consists of two verticals and one honzontal both of 48.3mm OD tube. On vertocals, Lugs are welded° at 500 mm c/c provide rigid support to horizontal which has built in three way clamps welded at both ends to taking bracing tube connecting Units

Standard Sizes :
2000x1220, 1500x1220, 1000x1220, 1830x1220. 1830x1220. 1830x1220


Yes! I am interested


We are known as one of the trustworthy manufacturers and suppliers of cantilever brackets from Sonipat (Haryana). Tulika Engineers Pvt. Ltd. specializes in manufacturing cantilever brackets of different sizes, specifications, and designs. These brackets are made using the finest grade metal to endure any kind of weather conditions. Our product is dimensionally stable and meant for long-lasting use in construction applications. A number of customers place repeated orders for the brackets, we make available in different quality, finishes, and grades.


Yes! I am interested


Made out of 40 mm N.B. "M" Tubes conforming to I.S.1161 or I.S.-1239 with provision of cups @ 500 rnm interval. Welded bottom are pressed from high quality steel as per I.S.1079 and the captive mobile top cups are made out of malleable casting. Both the cups provide firm grip to Ledger Blades & make the connection rigid and to endure rough site handling. Standards Sizes: 1.0M, 1.5M, 2 OM, 2.5M, and 3.0M & as per client's requirement.


Yes! I am interested


Made out of 40 mm N.B."M" Tubes conforming to I.S.1161 or I.S.1239 having identical forged blades welded at both ends.


Standard Sizes : 1.0M, 1.25M, 1.5M, 2.0M or as per clients requirement.


Yes! I am interested


it consists of a rigid welded frame of two vertical 40NB pipes connected by two 32 NB pipes as horizontals. Two pieces of 50 NB pipes are welded at top of the frame to accommodate the bottom of another similar frame. The frames are Interconnected by Scissors cross braces (20 NB "L") through pins welded on frames and locked in position by spring clips.

Standard H-Frames :
2000x1250, 1500x1250. 1 000xsoo or as per client's requirement H-Frame with 50 NB verticals are suitable for staging heavier structures.


Yes! I am interested


250-mm long MS spigots made of 3mm thick & 38-mm square pipe is provided at lop of each vertical for making vertical connection Spigots are drilled in two places to receive locking pins.


Yes! I am interested


Cantilevers made out of 40N.B."M" Tube with forged blaaes welded to two arms and with provision for accepting U-head jacks at the other end.


Yes! I am interested


Made from MS bright bar of 32 or 36 with adjustment upto 225 mm / 350 mm or required size and provided with MS nuts made from 56mm bar. Each jack welded with a base plate of 1S0x150x6-mm size.


Yes! I am interested


Made from MS bright bar of 32 or 36 mm with adjustment upto 225 mm / 350 mm / 450mm or required size and provided with MS nuts made from 56mm bar. Each jack comprises of 6 mm thick & 75 mm wide Stirrup heads (U-Shaped) which is used to hold steel or timber runners.


Yes! I am interested


Pressed coupler made out of 4mm MS sheets are used for connecting two tubes It may be Swivel Coupler for connecting tunes at any other angle.


Yes! I am interested


Pressed coupler made out of 4mm MS sheets are used for connecting two tubes It may be Right Angle Coupler for connectrrig tubes at right angle to each other.


Yes! I am interested